Product Ranges
Intrusion Detection, Fire & Safety
Contact Us
  • Vedard Alarm Security Export Sales Company

  • Country: China
  • City: Quanzhou
  • Address: Qingmeng industrial zone
  • Contact Person: Karl Liang

How to clean Smoke Detector
Smoke Detector is essential component of fire security alarm system. It can sense smoke and if the smoke density reaches to set value, it triggers alarm.

According to the fire department regulation, the smoke detector should be cleaned at least once every 3 years. Because the using environment is with dust and oil in the air. The dust and oil will cover on the smoke detector and even infiltrate into the sensor part of the smoke detector. If the smoke sensor is covered by dust or oil, the sensitivity will change and it can not accurately detects smoke of fire.Clean Smoke Detector

Smoke detector is designed with dust proof such as with dust cover and with labyrinth chamber. But cleaning of the smoke detector is necessary as well. The cleaning work can be done regularly by professional cleaning department with ultrasonic cleaner.

For family smoke detector or not very dirty environment used smoke detector, it can be cleaned easy by vacuum cleaner. Below we will introduce the steps of smoke detector cleaning by vacuum.

Notify the proper authorities of smoke detector maintenance and disable the zone.
Remove the sensor to be cleaned from the system.
Remove the sensor cover by pressing firmly on each of the four removals tabs that hold the cover in place.
Vacuum the screen carefully without removing it. If further cleaning is needed, continue with step. 5, otherwise skip to step 7.
Remove the chamber cover/screen assembly by pulling it straight out.
Use a vacuum cleaner or compressed air to remove dust and debris from the sensing chamber.Use smoke alarm
Reinstall the chamber cover/screen assembly by sliding the edge over the sensing chamber. Turn until it is firmly in place.
Replace the cover using the LEDs to align the cover and then gently pushing it until it locks into place.
Reinstall the detector
Test the detector as described in testing of manual.
Reconnect disabled circuits.
Read more articles about smoke alarm, gas detector, fire alarm, burglar alarm system using and maintenance from Vedard Security Alarms. Welcome to subscribe the newsletter from Vedard alarm System blog.
More News