How to Install LS VISON IP Bullet camera?
Source: LS VISION
Date: 2016/11/29
Typically when you buy a HD IP camera, you will receive a manual that contains detailed information for camera installation. However, you may get cameras that have manuals only teach you how to operate the camera. In this article, we aim to share you a detailed camera installation manual for HD IP IR bullet camera.
Before installing and using the camera, please read this manual carefully.
WARNING
Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product.
Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to the product.
Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause excessive heat generation or fire.
Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.
Do not place conductive objects (e.g. screw drivers, coins, metal items, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
If any unusual smells or smoke come from the unit, stop using the product. Immediately disconnect the power sorce and contact the service center. Continued use in such a condition may cause fire or electric shock.
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way
When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.
Step 1: To pass cables through the wall/ceiling, drill holes on the wall/ceiling.
Step 2: Connect the network cable, power cable respectively. See the section Installation - Cabling for details.
Step 3: Fix the camera on the wall/ceiling by screw provided. (Note: Loosen the Pan/Tilt stopper screw a litte before xing the camera.)
Step 4: By using the video test cable, check the screen during installation. You can adjust the zoom ratio using the T-W jog button.
More News