VoIP SIP paging end point – Viking’s PA-IP

VoIP SIP paging end point – Viking’s PA-IP
The PA-IP is a paging adapter that interfaces directly with hosted and on-premise VoIP SIP phone systems. It is designed for single zone and multicast paging, as well as interfacing with analog amplifiers and speakers.

“The PA-IP is easy to install and easy to operate. Following the tradition of our popular PA-2A paging amplifier, we have once again brought a cost effective solution to the paging market.” – Bill Heideman, President, Viking Electronics.

The PA-IP connects to a PoE switch with a single RJ45 Ethernet connection. It can be programmed as an end point device, as well as being a part of a multicast paging group for zone paging. Background music, emergency notifications, and school bell / break tones can play through the PA-IP while giving priority to voice paging. Use the loud ringing / night bell trigger input to alert employees in noisy areas of a phone call, and can also be used for signaling after-hours calls. The PA-IP has an amplified output capable of powering five additional 8 Ohm analog ceiling speakers and a line-level output for connecting to an existing amplifier or self-amplified speakers.

Network downloadable firmware and auto-provisioning software is available from the Viking Electronics website and will keep the PA-IP up to date and operating effectively. A security code that protect against unauthorized paging can be activated using the auto-provisioning software. The programmable on-board relay can be used to trigger lights, cameras, door strikes, gate motors and more.


Product Adopted:
Others


Share to:
Comments ( 0 )
security 50