Products
Product Profile
Vi1032 Passive Transceiver
Vi1032 Passive Transceiver
  • Supplier: Vigitron, Inc.
  • Region: United States
  • Updated: 07/19/2007
  • Click Frequency: 1775
Inquire Now
Product Specifications
  • Features

    - Quality color and B&W video over 1000 feet (305 m) of unshielded twisted pair wires (UTP)*.

    - NTSC, PAL , and SECAM video formats

    - Compatible with qualified cameras with built-in UTP transmitter

    - 60 dB cross talk and noise immunity

    - No power required

    - Built-in surge protection

    - Female BNC and detachable terminal blocks

    - Female BNC and detachable terminal blocks

    - Includes 32 two-foot coax jumper cables

    - Limited Lifetime warranty

    Applications

    - Security and Surveillance

    - Elevator Surveillance

    - Casino Security

    - Hospitals and Airports

    - School Campuses

    Vi1032

    The Vigitron Vi1032 32-ch passive transceiver hubs that transmit video over unshielded twisted pair (UTP) wires, point-to-point, for distances up to 1000 feet (305 m)*. They are used with Vi1000 or VB1000 transceivers to support "up-the-coax" PTZ signals. These Hubs use Category 2-5 twisted pair wires, are easy to install, cost effective, and do not require power.

    They have built-in surge suppression to protect video equipment against damaging voltage spikes and provide noise immunity to ensure quality signals without disturbing "hum-bars". These hubs offer quality video in a highly integrated and cost-effective package. They are ideal for a wide variety of security and surveillance applications that require high-density CCTV systems.

    Wire and Cable Recommendations

    The Vigitron products are designed to be used with unshielded twisted pair (UTP) wiring. The UTP wire must be 24AWG - 12AWG or Category 2 - 7 cable. Multi-pair cable with an overall shield is acceptable, however individually shielded pairs should be avoided, Multiple UTP Video feeds can be operated in the same communication cable along with telephone, computer, control signals and low power voltages. While UTP video may be routed through punch-down block terminals, any resistive, capacitive or inductive devices (such as Ttaps or MOV''s) must not be used. For more specific information regarding wire types and proper installation techniques, please contact Vigitron for technical assistance.