10 loops linkage fire alarm fire fighting security system
Key Specifications
FACP 10 loop fire alarm control panel(Including software)
Cabinet type: for cabinet type controller, or desktop controller.
Addressabl fire alarm control panel with complete modules for monitor, conventional type detector connection input output module, siren horn flash light warning device connection output module. https://www.vedardalarm.com/addressable-fire-alarm-systems-c-17_12
Host capacity: 10 loop, alarm linkage total of 2420 address points.
Has the equipment: print function, 24 point bus linkage operation disk, 6 points multi line control panel, controller power supply, DC24/10A linkage power supply. standby DC power supply unit, cabinet or qintai.
Optional equipment: according to the actual situation of the project, the bus operating system and multi - line control panel
It has built-in linkage control and is net workable with other same brand panels to make a completely flexible linkage control system.
This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mount design.
It is compatible with complete range of our electronic coding, remote control coding series intelligent detectors, manual call point, input module, I/O module etc.
The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combined with main control module, driver board and communication board.
Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor etc. via repeater interface modules.
The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation.
Loop isolator can be used to separate fault circuit from the system. The FACP has dust contamination warning function to make sure the detectors work properly and effectively.
CRT fire alarm display system can be connected via RS232
Contact vedardalarm to get instruction manual and configure the addressable fire alarm system.(vedardalarm.com)
