Product Profile
Sell Protocol Converter
Sell Protocol Converter
Inquire Now
Product Specifications
  • E1/10(100)Base-T Protocol Converter

    E1/V.35 Protocol Converter

    V.35/10(100)Base-T Protocol Converter

    E1/RS232 Protocol Converter

    FHC3100-A E1/10(100)Base-T Protocol Converter


    High performance bridge for 10(100)Base-T Ethernet extension

    Fully compatible with IEEE 802.3 and Ethernet Standards

    E1 channel: both framed & unframed are OK, both 75 & 120ohm are OK

    Ethernet Port: 10Mbps, Full/Half Duplex Mode compatible

    Ethernet ports support MDI/MDI-X selectionable

    Allow transmitting and receiving VLAN data packet

    15000 frames per second filtering and forwarding rate

    1000 MAC address LAN table, and automatic LAN table learning and aging

    Standalone and Module optional

    Power of Chassis: 2 Slots for slide in power supplier module, AC or DC power supplier module, Redundant Power supported

    AC220V∮20% or DC-48V power input


    LAN port

    Standard: Conforms to IEEE802.3 / 10(100)Base-T Ethernet

    Data rate: 10Mbps(20Mbps/10Base-T in Full duplex topology)

    Compatible on Full/Half duplex topology

    Connectors: RJ-45 Connector

    Transfer distance: <150m

    E1 port

    Standard: ITU G.703, G.704,

    Jitter Performance: According to ITU G.823

    Bit rate: N⊙64Kbps, N=1~31 (Fractional Mode) or 2.048Mbps(Full Mode)

    Line Code: HDB3

    Line Impedance: 75/120ohms optional

    Pulse Amplitude: Nominal 2.37V∮10%


    Voltage: AC 220V∮20% or DC -48V

    Power Consumption: <3 Watts

    Temperature: 0-50

    Humidity: 0-90%(non-condensing)

    Size: (Width: from left to right)

    Standalone: 272mmWidth⊙ 139mmDeep⊙ 41mmHigh

    Chassis: 438mmWidth⊙ 252mmDeep⊙ 178mmHigh