Product Profile
Bartec A+B Duplicated System Architecture

Bartec A+B Duplicated System Architecture

  • Supplier: Bartec Vodec
  • Region: United Kingdom
  • Updated: 06/21/2011
Product Specifications
  • Where the alarm and voice broadcast (PAGA) system is intended to provide vital life safety/dependant instruction/warnings a fully duplicated A+B configuration is implemented. The intent is that a single fault, no matter how catastrophic, shall not inhibit the reliable distribution of alarm and voice broadcast to all potential listening positions. The duplicated PAGA package is arranged such that there is no possibility of common mode failure and design obviates cross transference of possible fault conditions from one sub-system to the remaining working sub-system.

    Each compartment is fitted with loudspeakers assigned separately to A and B PAGA subsystems. The areas where ambient noise exceeds 84 dBA A and B flashing beacons should be fitted. The two sub-systems are strictly segregated with central panels remotely located from each other. Cables extending from the panels to field devices follow separate routes utilising differing transits, cable race ways, racking and tray work, additionally all cables are mechanically protected.

    Loudspeaker distribution is arranged such that with either A or B system isolated a minimum signal to noise differential of +6dBA is maintained at all potential listening locations and that in sleeping area a minimum of +75 dBA at the bed head is maintained. Both A and B systems are normally on line and operate independently. There are no sharing of resources or signals. Hot-standby equipment within A or B sub-system is normally not required (unless specifically required by client). The A and B systems are held in synchronisation by an optically coupled cable A to B to A. in the event of loss or corruption of this link the worse case scenario is that alarm tones can no longer synchronise, but coverage is mantained.