Fiber Optic Video Transmitter VOS-2000FT/R can transmission 2-Channel digital
video over fiber optic cable for fixed camera, no audio, no data.
Stand-alone or rack-mount. All units of VOS-2000FT/R come in an insert card version. The cards can be inserted into our 14-slot, 19inch 4U rack-mountable card cage (VOS-CH04).
Single-Mode or Multi-Mode, VOS-2000FT/R can support FC/PC, ST/PC connector, can be used in daisy-chain system(Need to customize) The Transmission distance range according to the Optical Budget. Manufacturer''s standard is: Single-mode 20km.
? Video
Number of Channels: 2 Channels Video
Video input/output impedance: BNC 75 Ω
Video input/output Compatibility: PAL, NTSC,SECAM
Video input/output voltage: 1.0 Volt p-p
Bandwidth: 6.5MHZ
Bit Resolution: 8-Bit Digital Transmission
Differential Gain: < 1.5%
Differential Phase: < 1.5 °
Tilt: < 5%
Signal-to-Noise Ratio(SNR): > 67 dB
? Connectors
Video: 75 Ohm BNC (Gold Center Pin)
Optical: FC (standard), ST Optional
Stand-Alone Power: Screw terminal block
Rack Power: AC line cord
? Electrical & Mechanical
Input Power Requirements: DC 5V@2A
Power Adapter: AC 100V~240V
Power Consumption: < 3W
Stand-Alone Dimensions: 142mm × 107mm × 25mm
Card for 4U Rack Dimensions: 145mm × 170mm × 20mm
Shipping Weight: 1.8kg (include Transmitter & Receiver)
? Environmental
Operating Temperature: -40°C ~ +75°C
Storage Temperature: -40°C ~ +85°C
Relative Humidity: 0% ~ 95% (non-condensing)
MTBF: >100,000 hours
Ordering Information & Optical Specifications
Model Number Fiber Mode Wavelengths Optical Power Budget Maximum Transmission Distance
Transmitter Receiver
VOS-2000FMT VOS-2000FMR Multi-Mode 1310nm 16dB 2km
VOS-2000FST VOS-2000FSR Single-Mode 1310nm 12dB 20km
VOS-2000FST-4 VOS-2000FSR-4 Single-Mode 1310nm 18dB 40km
VOS-2000FST-6 VOS-2000FSR-6 Single-Mode 1550nm 25dB 60km
Note:
? The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm).
? When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
?
Fiber Optic Video transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
? Maximum transmission distance is also limited by fiber bandwidth.
? Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug.
? Please feel free to consult factory for any special requirement and customization.
Features
? Support Point-to-Point or Daisy-Chain connection
? Uncompressed Digital Composite Video over one fiber
? Compatible with all PAL, NTSC,SECAM Video Systems
? Multimode Fiber Support for Distances up to 2 km
? Single-Mode Fiber Support for Distances up to 100 km
? LED Status Provide Rapid Indication of Operating Parameters
? No EMI or RFI and no ground loops
? Support Coarse Wavelength Division Multiplexing (CWDM)
? Stand alone or rack-mount
? Produce according to customer''s specifications,providing OEM
Note: Due to continuous improvement, all
fiber optic transmission systems product specifications are subject to change without further notice.