The Fluidmesh Endo series units are designed to be embedded in custom-made, outdoor enclosures for special applications such as public-safety or industrial monitoring in classified areas.
The Fluidmesh 2200 Endo is a dual-quadri-band radio wireless product which can operate at 2.4 GHz, 4.9 GHz, and 5.1-5.8 GHz and modulate up to 108 Mbps. It uses the same hardware and software of the Fluidmesh 2200 Duo, but is encased in a much smaller form factor.
The Fluidmesh 2100 Endo features one quadri-band radio and can operate at 2.4 GHz, 4.9 GHz, and 5.1-5.8 GHz. Like the Fluidmesh 1100, the 2100 Endo comes with the innovative FluidThrottle technology which allows the user to limit the total cost of ownership of the wireless network by paying only for the amount of bandwidth required. It has three Ethernet ports and a single SMA antenna connector.
Optimized PRODIGY Transmission Protocol for maximum Reliability The Fluidmesh Endo Series employs PRODIGY, Fluidmesh's proprietary high performance ‘intelligent’ transmission protocol built to overcome the limits of standard license-free protocols and to deliver a wireless infrastructure with a higher level of reliability. Prodigy was developed to transmit any IP-compatible traffic including data, video, and voice. At the base of our innovative transmission protocol, there is a traffic optimization algorithm that allows every Fluidmesh device to assign a specific level of priority and reliability to every packet transmitted. This process allows the wireless network to automatically adjust its transmission parameters based on the type of traffic transmitted. The overall result is a better, more reliable, multi-service wireless infrastructure.
The Fluidmesh Endo Series supports the patent-pending FluidMAX technology and can be used to create Point-to-Point, Point-to-Multipoint, and Mesh architectures.Thanks to FluidMAX, the Fluidmesh Endo Series can operate with a centralized medium access control protocol, or with a distributed medium access control protocol, depending on the network layout. That means that our units can operate in either CSMA or TDMA. The decision is made automatically by the network based on its layout and requires no user intervention.
EasyMesh Platform and FMQuadro Web Interface
The Fluidmesh Endo Series includes the EasyMesh platform. This technology allows the user to set the same range of private IP addresses across the entire network. This automatic tunneling hides the Fluidmesh Layer 3 network from the connected devices allowing the user to set up the system in Layer 2, reducing configuration and deployment time. The Fluidmesh Endo Series also includes the FMQuadro? Web interface which allows the user to configure, monitor, and troubleshoot the wireless network in real time without the need for additional software. The FMQuadro Web-based user interface provides real time throughput analysis and is capable of automatically reporting network congestion scenarios through a fully interactive network monitoring system.
AES-128 Encryption Support (FIPS-197 Compliant)
The Fluidmesh Endo Series includes support for 128 bit AES Encryption at the link-level which can be used for FIPS-197 compliance. Because AES is implemented in hardware, there is no loss in terms of performance when AES is enabled.
Simple Network Management Protocol (SNMP) Support
The Fluidmesh Endo Series supports SNMP version 3. The Simple Network Management Protocol allows the user to centrally manage the mesh devices with a SNMP server and to receive automatic alarms in case of network failure.
* Quadri-band: 2.4, 4.9, 5.1-5.8 GHz
* Modulation up to 108 Mbps
* Selectable Channel Width (5-40 MHz)
* Prodigy Intelligent Transmission Protocol
* Built-in Spectrum Analyzer
* Range up to 30 miles in LOS
* Self-healing network
* Web-based management
* 802.1Q VLANs Support
* Low Power Consumption
* AES 128 Bit Encryption
* VPN support
* Cryptographic support (SSL, HTTPS)