backpic
Product Ranges
Transmission
Contact Us
  • Yoda Communications, Inc.

  • Country: Taiwan
  • City: Hsinchu
  • Address: 2F, 3-1, Industry East Road IX, SBIP
  • Contact Person: Long Chang
Key Specifications

Yoda Power over Ethernet (PoE) Injector delivers data and electrical power to access point, IP cam, and device with PoE-PD embedded using standard Category 5 Ethernet cable.

 

The Power over Ethernet (PoE) Adapter is easy to install. It's Plug n Play and requires no tools or software. Best of all, the PoE is lightweight and compact size means you can locate it virtually anywhere and never know its there. The PoE transfers data on Category 5 Ethernet cable pairs 1/2 and 3/6. Power is transmitted on unused Ethernet pairs 4/5 and 7/8. It has an operational range of up to 328 ft/100m, which is a requirement of the Fast Ethernet standard.

 

PI100 is 1 Ethernet Input (data only) port and 1 Output (data + power) port Power over Ethernet Injector that is designed for small or medium network environment to perform PoE application. This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding PoE Splitter PS-103E to existing networking, installing networking products such as Access Points and IP cameras can be easily perform PoE application. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

 

By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both power and data where power source is difficult to obtain. It helps you reduce installation time and cost.

Key Features & Benefits

 

·   Comply with IEEE802.3af, Power over Ethernet, IEEE802.3/802.3u 10/100Base-TX

·   Provides 48V DC power over RJ-45 Ethernet cable to device with Ethernet port

·  Distance up to 100 meters with RJ-45 Ethernet cable

 

 

Data Input:

RJ-45 Jack (Pin 1,2,3,6)

Input Voltage:

36 ~ 57 V DC (48V)

PoE Interface:

RJ-45 Jack

Output Power:

15.4W MAX or 50W for P!-100H

PoE Output :

RJ-45 Jack (Pin 4,5,7,8)

 

 

General Specification

 

Operating Temperature:

-10°C ~ +60°C (14°F ~ 120°F)

Storage Temperature:

-20°C ~ +70°C (-4°F ~ 158°F)

Humidity:

Up to 90% (non-condensing)

Weight

0.3 kgs

Dimension:

165 (L) x 105 (W) x 45(H) mm

One Port Power over Ethernet (PoE) Injector PI-100/PI-100H
Related Products
YODA PW2404 24-Port PoE Switch
YODA PR100 PoE  Repeater
YODA PE101 PE102 PoE Extender
YODA PW541UG 5p Gigabit Switch with 4p Ultra PoE
YODA PW1602 16 Port PoE IEEE 802.3 switch
Yoda IP–Base HDMI Transmitter/Receiver for Digital Signage
Yoda EP2wire 2wire/coax PoE Repeater
1 of 5