Key Specifications
Specifications
Image Sensor 1/4" SONY
Effective Pixels NTSC:768 x 494 pixels PAL:752 x 582 pixels
Scanning System 625 lines, 50 fields/sec
Panning speed 0.1°-270°/Sec
Tilt Speed 0.1°-85°/Sec Flip
Preset Speed 400°/Sec
Tilt Angle 90°(180°)
Synchronization System Internal/ VD-Lock
Min. Illumination, normal mode 0.01 Lux(Sen-up)
Resolution 600 TVL
Signal-to-noise Ratio 48db
White Balance ATW / AWC / Fixed
Backlight Compensation Super BLC,48 BLC Areas
Auto Gain Control Auto (18db max.)
A.L.C. Auto/Fixed
Image effects Available in OSD menu
Freeze Image Function When alarm signal is triggered or can be set in OSD menu
Separating Lines On/Off, available in OSD menu (position is controlled by software)
Electronic Shutter AES : 1/50 ~ 1/10,000 sec.
Lens 27X Optical Zoom Lens,F1.5~3.8, f=3.6~98.0mm
Zoom 270X (27X Optical, 10X Digital)
Focusing System Auto/Manual
Positions 64 (Zoom, Focus)
Video Output Composite: 1.0Vp-p 75 Ohm,
Control Interface VISCA? (TTL signal level): 9.6 KB/s, 19 KB/s, 38.4 KB/s, bits: 1/2
Compression Format H.264/MPEG-4/M-JPEG
Max. Video Resolution D1, , CIF,, QCIF
Video Quality 4 levels adjustable
Frame Rate Up to 30fps
Audio Input 3.5mm stereo socket, sensitivity 1 Vrms
Audio Output 3.5mm stereo socket, sensitivity 1 Vrms
Compression Method IMA ADPCM (Pulse Code Modulation)
AUDIO Mode Two-way audio
Interface 10Base-T/100Base-TX auto-negotiation, RJ-45 socket
Support MDI/MDI-X auto crossover function
Supported Protocols HTTP, TCP / IP, UDP, RTP, RTSP,FTP, SMTP, DHCP, DNS, DDNS, NTP
Bandwidth Control Min. 64 kbps adjustable
Max. Client Limit 32 simultaneous clients
Alarm Input 1
Alarm Output 1
Event Trigger by Alarm input, Manual trigger,Motion detection and Schedule recording
Notification over Trigger alarm output, Send mail notification, Upload video to FTP, Record video to PC and Network alarm
HARTWARE RESET YES
Operating Temperature -65?C ~ + 65?C
Humidity up to 85%
Power Supply 24VAC 3A 60Hz/50Hz
