Sell Protocol Converter

E1/V.35 Protocol Converter

V.35/10(100)Base-T Protocol Converter

E1/RS232 Protocol Converter

FHC3100-A E1/10(100)Base-T Protocol Converter

Features

High performance bridge for 10(100)Base-T Ethernet extension

Fully compatible with IEEE 802.3 and Ethernet Standards

E1 channel: both framed & unframed are OK, both 75 & 120ohm are OK

Ethernet Port: 10Mbps, Full/Half Duplex Mode compatible

Ethernet ports support MDI/MDI-X selectionable

Allow transmitting and receiving VLAN data packet

15000 frames per second filtering and forwarding rate

1000 MAC address LAN table, and automatic LAN table learning and aging

Standalone and Module optional

Power of Chassis: 2 Slots for slide in power supplier module, AC or DC power supplier module, Redundant Power supported

AC220V∮20% or DC-48V power input

Specifications

LAN port

Standard: Conforms to IEEE802.3 / 10(100)Base-T Ethernet

Data rate: 10Mbps(20Mbps/10Base-T in Full duplex topology)

Compatible on Full/Half duplex topology

Connectors: RJ-45 Connector

Transfer distance: <150m

E1 port

Standard: ITU G.703, G.704,

Jitter Performance: According to ITU G.823

Bit rate: N⊙64Kbps, N=1~31 (Fractional Mode) or 2.048Mbps(Full Mode)

Line Code: HDB3

Line Impedance: 75/120ohms optional

Pulse Amplitude: Nominal 2.37V∮10%

General

Voltage: AC 220V∮20% or DC -48V

Power Consumption: <3 Watts

Temperature: 0-50

Humidity: 0-90%(non-condensing)

Size: (Width: from left to right)

Standalone: 272mmWidth⊙ 139mmDeep⊙ 41mmHigh

Chassis: 438mmWidth⊙ 252mmDeep⊙ 178mmHigh