Apollo’s AAN-100 Intelligent System Controller for Access Control and Alarm Monitoring sets the industry standard with support of up to 96 devices (readers, alarm panels, status panels) and memory capacity of 1,240,000 cardholders/65,535 events. The on-board 32-bit processor supports advanced inter-device reactions (Internal Variables) that are stored within the controller’s memory and thus operate without relying on a PC/software host, providing ultra-dependable functions for the highest security applications.
FEATURES
Supports up to 96 card readers (either directly to intelligent card readers, or via Apollo AIM/API reader interfaces)
Supports four additional devices for status monitoring or alarm input/output for a total of 100 devices
Up to 1,300,000 Cardholders or 65,535 Events with 8 MB of RAM
Supports Input to Relay linking across field devices
Anti-Passback (Hard & Soft)
256 Access Levels / 128 Time Zones
2-Card Access and Zone occupancy restriction
2 Man Rule (Minimum occupancy)
Automatic Alarm masking/unmasking, Reader mode change, Output activation according to time zones and/or inputs
Elevator Control w/ floor selection feedback
Field Device Connection: (4) RS-485/232 ports, max 9600 baud.
Host Device Connection:
ASI-1 Serial interface with (2) RS-485/232 ports, max 57.6K Baud
Up to 16 unique addresses possible on one comm line
OR
ANI-1/100 Network Interface device (TCP/IP via RJ-45 jack)
Available addresses limited by only by network addresses available
Diagnostic LED''''s (for normal operation and self-test mode)
8 Card formats per reader (depending on reader support)
Field-Replaceable plug-in communication drivers
32-Bit CMOS processor
Surface-mount manufacturing technology
SPECS:
Power Requirements: +12 to +28Vdc @ 300mA (with ASI-1) @ 400mA (with ANI)
Dimensions: 7.5 in x 5.5 in x 1.0 in (19 x 14 x 2.54 cm)
Operating Temperature: 0 to 70° C
Storage Temperature:-40 to 85° C
Relative Humidity:0 to 95%, non-condensing
Weight: 1 Lb (.45 Kg)
Memory Backup: 3 AA Alkaline batteries type NEDA 15A
Communication: 2 Host Ports (RS-485 or Ethernet 100 BaseT
w/ANI-100); 4 Device ports (RS-485, RS-232, Ethernet 100 BaseT w/ENI-110)
Inputs: 1 Cabinet Tamper; 1 Power Fault
Approvals: CE, RoHS