4-in-1 2D Comb Filter Video Decoding Solution (AL244C-EVB-A0/A1)
Key Specifications
This solution supports CVBS, S-video and Component inputs. It decodes NTSC/ PAL/ SECAM from this input interface and converts it into YCbCr 4:2:2 or RGB- 565 digital video data through the programmable data bus.
Features:
a. Analog Input
- Four 10-bit ADC, AGC & ACC (Automatic Clamping Control)
- Supports Auto Multi-Standard NTSC/PAL/SECAM mode detection
- Supports Weak & Non-Standard Signal mode detection
- Adaptive 2D Comb-Filter video decoding for Y/C separation
b. Digital video output
- Supports four digital ITU-R 656 8-bit outputs with four-video-decoder mode.
- Supports two ITU-R 601 16-bit outputs with two-video-decoder mode.
- Supports RGB 565 16-bit output with two-video-decoder mode.
c. Video Processing
- Closed Caption/V-Chip/WSS/WSS-J VBI decoding.
d. 4-Decoder Mode (A,B,C and D)
- 4 analog CVBS inputs for each of the four video decoders
- Standard ITU-R BT 656 format 8-bit outputs
- 4 RTSO (Real Time Status Output) signals for each of the 4 video decoders
- 2 Fast Channel-Switching I/O''s for each decoder
e. 2-Decoder Mode ( AB and CD)
- Each of the 2 video decoders support S-Video and Component inputs
- Standard ITU-R BT 656 format 8-bit outputs
- Standard ITU-R BT 601 format 16-bit outputs
- Digital RGB output ( 8-bit for Green channel,6-bit for Red and Blue Channels )
- 4 RTSO (Real Time Status Output) signals for each of the 2 video decoders
f. Miscellaneous
- 1.8V core logic. 3.3V I/O with 5V tolerance
- Controlled via 2-wire serial-bus interface. All 4 video decoders require only one serial bus and share one slave address
- Requires only one crystal for all 4 video decoders
- Supports interrupt output pin for hardware mode detection
- Built-in Test Pattern Generator
- Low power consumption
- Small-size and Lead Free Package
- LQFP-128 (14x14mm) and LQFP-80 (10x10mm)
Applications:
a. Video Surveillance System
b. Video Editing System