Finseen Group Company Limited

Finseen FC-300 IP alarm system via a mobile app available for Android and IOS. With it, the user can learn about the current state of the system from the installed in the house. In the event of a panic alarm , the application will immediately notify the user. All control is done by the app.

Specification:
Power supply: 5V/1000MA
Battery: lithium battery 800MA/H
Standby Current: 220MA
Alarm Current: 310MA
Receiving Frequency: 868.35MHz
Emitting frequency: 868.35MHz
Receiving and emitting distance: More than 100metres under open area
APP:Andriod ,IOS
Battery backup:YES
Certificate:CE

Feature:
1)Can set arm delay (exit delay) time, alarm delay (entry delay) time;
2) Learn Remote Control and Detector ; Delete Remote Control
and Detector;
3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery
Alarm through Internet;
4)can Upload Status In Alarm panel of mobile phone ;
5) Alarm siren keeping time is 2minutes;
6) Can be set with 10pcs of Remote Control ID;
7) Can be set with 99 wireless zone, and each zone can
learn 1pc of accessories;
8)DIY, easy to operate;
9)High security features: password protection.

Alarm Host:
The IP Alarm’s scanner keeps watch in your home - even when you are not there.
The IP Alarm scanner is the alarm’s central component. It gathers data and starts the sirens in the event of fire and break-in.

Door/Window Sensor:
IP Alarm’s door/window sensor is an intelligent switch, which you attach to the doors and windows or other places in your home where you want control or an alarm in the event of a break-in.

PIR Detecter:
P Alarm’s motion detector is what many call a PIR sensor (Passive Infrared) or PID sensor (Passive Infrared Detector).
In daily use, a motion sensor is one of the most important components in the surveillance of your home against break-ins. It is best placed in areas where you expect a thief to pass.
A little diode shows when the sensor is communicating with IP Alarm. All communication is done via the wireless technology, which the scanner and sensor utilize. You can see the sensor communicating when the light is on.

Remote Control:
IP Alarm remote is the simple solution for children and others who need an easy and uncomplicated way to turn the security system on and off.
The remote control is fitted with a little diode which lights up when it transmits a signal.

Smoke Detector:
IP Alarm’s smoke detector uses the same wireless technology as other IP Alarm units.
The sensor reacts to smoke, and as soon as it detects smoke in the vicinity,IP Alarm’s discover it, whichimmediately ensures that you are alerted. The alarm results in the IP Alarm scanner’s siren working with the siren in the detector when it is activated. At the same time, you and your loved ones will be alerted by your smartphone or by email. You decide who needs to be alerted. You can easily adjust this in your notification center in the IP Alarm app. It minimizes the response time for help to those who cannot leave the house on their own. If you have allied with a neighbor, they might be there in a few minutes.

Gas Detector:
IP Alarm’s gas detector is an electrochemical sensor, which sounds the alarm if your gas boiler or stove is leaky.
The unit is in direct contact with IP Alarm and can therefore be seen online. The sensor reacts to LPG as well as natural gas (LNG). In this way, you can keep an eye on your gas boiler and stove if you use gas for cooking or heating purposes.

Indoor Siren:
IP Alarm’s indoor siren is for those who want a more powerful siren in case of an alarm, or for those with a big house where the built-in siren of the IP Alarm’s scannercannot be heard well enough.

Standard Alarm Kits:
1)Alarm host*1(multi languages setting on APP)
2)Wireless Door/Windows Sensor*1
3)PIR Detector*1
4)Remote Control*1