Yoda Power over Ethernet (PoE) Injector delivers data and electrical power to access point, IP cam, and device with PoE-PD embedded using standard Category 5 Ethernet cable.

The Power over Ethernet (PoE) Adapter is easy to install. It's Plug n Play and requires no tools or software. Best of all, the PoE is lightweight and compact size means you can locate it virtually anywhere and never know its there. The PoE transfers data on Category 5 Ethernet cable pairs 1/2 and 3/6. Power is transmitted on unused Ethernet pairs 4/5 and 7/8. It has an operational range of up to 328 ft/100m, which is a requirement of the Fast Ethernet standard.

PI100 is 1 Ethernet Input (data only) port and 1 Output (data + power) port Power over Ethernet Injector that is designed for small or medium network environment to perform PoE application. This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding PoE Splitter PS-103E to existing networking, installing networking products such as Access Points and IP cameras can be easily perform PoE application. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both power and data where power source is difficult to obtain. It helps you reduce installation time and cost.