1.Can combine with normal phone set, alarm console or IP voice route transfer to GSM call-out.

2.When the PSTN phone line disconnects, it will automatically transfer to GSM and send event SMS.

3.5 LED indicators for Power On/Off, GSM/TEL, GSM on-line, TEL on-line and system fault.

4.Set program’s data by keypad, PC and SMS.

5.Set to save local language to the console / event / sensor’s name for the report.

6.Can connect to PC via USB port on window software to read/write setting all programs.

7.It can record 40 seconds and 4 kinds of different emergency voice messages by user.

8.Pre-set to save 2 phone numbers for digital dialer CONTACT ID on alarm calling-out.

9.Pre-set to save 4 phone numbers for playing Voice messages on alarm calling-out.

10.Pre-set to save 3 phone numbers for sending event SMS on alarm calling-out.

11.Low battery supervision is on the console and on each individual sensor.

12.Built-in input NC/NO port can connect to wire type sensors, alarm console or panic buttons to call-out to report alarm event.

13.Built-in 2 wires alarms output ports can trigger external siren, and NC/NO relay switch can control the light/CCTV.

14.Built-in rechargeable back-up battery, Tamper Switch and Power Failure Detector can automatically call-out report alarm event.

15.Call-in to send SMS command to set working mode and setup alarm program data, it will auto reply SMS to confirm.

16.Call-in to send SMS command to console to request replying working mode.

17.Can setup every 0-99 hours and automatically send SMS to report GSM ON LINE.