When triggered by an alarm system, the ENFORCER Voice Dialer can call up to 5 numbers and deliver a user-recorded 20-second voice message, playing repeatedly for one minute. Each number can contain up to 32 digits, including #, tones, and pauses. The LCD shows the number being dialed at each stage of the dialing process. The receiver can then listen in or broadcast a message to the room occupants or can disarm the system. The same functions are available by remote call in as well as arming the system. Includes a home mode (acting like a door chime when the owner is present) and panic button. The 105dB built-in siren alarm can be programmed on or off.

Feature

• Trigger-activated alarm and dialer with user-programmable 20-second alarm message.

• 16-Digit large display with date/time and function icons.

• 3 Triggers (1 N.C., 2 NO/NC) for multiple zone security.

• Call in at any time to listen in to room, broadcast to room, arm, and disarm dialer.

• Listen in, broadcast messages to room, and/or disarm during dialer call out.

• Programmable PIN number and entry delay timing.

• 5 Programmable emergency telephone numbers (up to 32 digits each).

• Programmable auto-dialing cycle repeat times.

• Home mode function (acts as a door chime when user is at home).

• Panic button.

• Back-lit keypad.

• Built-in flash memory to protect against system data loss in case of power failure.

• Touch-Tone dialing.

• Low-battery indicator for backup battery (battery not included).

• DC power input jack (power adapter not included).

• 9V battery backup (battery not included).

• Wall-mountable.

• Built-in 105dB alarm (with programmable alarm on/off).

• Built-in auxiliary output for external alarm or siren.

• Built-in line seizure.