Finseen Cloud based IP Alarm is smarter, more affordable home system for everyone. Remotely arm and disarm the alarm system with the free Andriod /IOS App. If a sensor is triggered, you can be automatically informed with a push or email notification on your Smartphone. With the Andriod /IOS App you have full control and see the status of your alarm sensors while you are at home,at work or on vacation.
The system is a DIY[Do it yourself] system with a minimum of setup. Just download and install the IP Alarm app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet.Check that your mobile device is connected to the internet. Enter the alarm ID and password in the app and follow the guides. Please, study the help sections for further details and learn
more about the individual components in this introduction.
System Operation:
• FullArm/HomeArm
1. Command by IP Alarm app or wireless remote control
2. Acoustic confirmation by the base unit.
3. User notification by push and email
4. By use of Exit delay (Set time 0-59s in IP App)
1)Acoustic buzzer sounds each second during exit delay
2)Long sound confirm a successful arm
• Disarm
1. Command by IP Alarm app or wireless remote control
2. Acoustic confirmation by the base unit.
3. User notification by push and email
4. By use of entry delay (Set time 0-59s in IP App)
1) Acoustic buzzer sounds each second during entry delay
2)Two short sounds confirm a successful disarm
Remote Control button feature:
• Arm
All devices within the Finseen IP Alarm System are armed; this can be
set using the remote tag or Finseen smartphone app. Upon choosing
"Arm", users will have 60 seconds to exit the premises before the
security system takes effect.
• Disarm
All devices within the Finseen IP Alarm system are now disarmed;
this can be done through the remote tag or Finseen smartphone app.
• Home Arm
Connecting the home security, secures the doors and windows in the
system whilst your motion sensors stays inactive so you can stay in the
house without the alarm sounding.
• Panic
Selecting this will activate the Finseen built-in siren,
Finseen smartphone APP Siren or external Siren.
Sensor system capability (Total: 99):
a. 10 pcs Remote controls
b. 19 pcs Smoke detector or gas detector
c. 40 pcs Door /Window sensor
d. 40 pcs Motion detectors
Main Features:
1.Remote control through your mobile phone.
2.Alarm signal auto send your mobile phone.
3. Power and internet connections are surveyed online .
4. The system can quickly accept an alarm signal.
5. Safe and easy to operate .
6. Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery
Alarm through Internet.
7. Can Upload Status In Alarm panel of mobile phone .
8. Alarm siren keeping time is 2minutes.
9. Can be set with 10pcs of Remote Control ID.
10. Can be set with 99 wireless zone, and each zone can
learn 1pc of accessories.
Specification:
Power supply: 5V/1000MA
Battery: lithium battery 800MA/H
Standby Current: 220MA
Alarm Current: 310MA
Receiving Frequency: 868.35MHz
Emitting frequency: 868.35MHz
Receiving and emitting distance: More than 100metres under open area
APP:Andriod ,IOS
Battery backup:YES
Certificate:CE
Standard Alarm Kits:
1)Alarm host*1(multi languages setting on APP)
2)Wireless Door/Windows Sensor*1
3)PIR Detector*1
4)Remote Control*1
Questions and answers：
•How do I set up the Finseen Cloud based IP Alarm system?
The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the “IP Alarm” app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.
• How can I log in APP?
Turn back the alarm host, you can find the Alarm ID and password from the sticker.
Then enter the ID and password and follow the guide to enter into your account email, user name etc.
• How do I add/enroll new sensors after the installation?
Ensure the system under “disarm”mode,”
- Go to the menu ´Device’ in the IP app
- Select ‘+´ to add Device
- Select the appropriate device illustrated.
- Press ´Enroll´ and follow the instructions in the Video.
- Wait for the confirmation from the server.
- After enroll, edit the location name of the device.
- Done…
• How can I know if the enroll sensors is successful or fail?
If your enroll succeeded, Red light of alarm host will flash quickly for 5seconds and the acoustic buzzer sound with 5 beeps at same rate as red light flashes.
But if your Enroll failed, Red light of alarm hot will be off, and Acoustic buzzer sound 1.5 s.