The burglar alarm system G50E adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely, which is designed for house, office, supermarket etc indoor use. It will call & send alarm SMS to user cellphones immediately when any sensor is triggered. The system can also be used as handfree mobile phone for two-ways communication.
The LCD on the alarm Main unit can show the time, data, operation guide, alarm details and status of arm, disarm, GSM signal, power etc. With the LCD, all the operation and program are visual and intuitive.
The system with human kind voice guide and can be recorded into all different kinds of languages and work well all over the world. The low-voltage warning for sensors and door/window opened reminder make use more friendly.
1.1 Function & Feature
*Color LCD screen, keypad with blue background light
*Maximum 4 wireless panic buttons, 4 wireless fire detectors,
*16 remote controllers, 32 wireless intruder detectors.
*Maximum 8 wired zones. Zone 1 and zone 2 for wired door/window magnetic contact, which will remind you if the door/window is open.
*Send alarm SMS to 5 preset mobile phone No.
*Auto dial 5 preset user phone No.
*Forward mobile company SMS to user automatically.
*Work with monitoring center, such as police station.
*Sensors low voltage reminder
*Learning code for wireless accessories
*Voice operation reminder.
*Three level password management.
*Independent arm/disarm function
*Zone classification prevent inside thieves effectively.
*Two fixed arm time, two fixed disarm time
*220 wireless address encode reduce the rate of same code greatly.
*SMS control & program
*SMS modifies wireless zones name.
*Arm/disarm by keypad, remote controller, phone or SMS
*Call the main unit to listen in status whenever.
*With internal MIC and speaker.
*External high sensitivity MIC or speaker (optional)
*Main unit with tamper switch
*External power failure alarm.
*Entry delay alarm
*Handfree mobile phone.
Main unit PARAMETER
* GSM frequency 900/1800MHz, 850/1900MHz (optional)
* Alarm response time Less than 10s (GSM in normality)
* Standby power consumption 1.5W
* Delay arm time 30s
* Recording voice time 9s
* External Power AC110-220V 50Hz or 60Hz; DC9V
* Backup battery (Li) DC7.4V, 700MAH
* Operating temperature -20℃ ~ 60℃
* Humidity ＜95%
* Wireless frequency 315±0.2Mhz/433±0.2Mhz
* Coding type Learning code
* Power requirements Remote controller: DC12V
* Indoor siren: DC12V
* Door/window magnetic contact: DC12V
* PIR sensor: 3V (two 1.5v batteries inside)
* Smoke detector: DC9v
* Gas detector: DC9V
* Shock sensor: DC12V (four 1.5v batteries inside)
*Emergency button: DC12V
Standard packing list
* Main unit 1pcs
* Remote controller 2pcs
* Indoor siren 1pcs
* Wireless door/window contact 1pcs
* Wireless PIR sensor 1pcs
* Adapter 2pcs
* User manual 1pcs